About JEMT

Introduction
a. Material Science
b. Civil Engineering
c. Chemical Engineering
d. Mechanical Engineering
e. Electrical and Electronic Engineering
f. Mining Engineering
g. Marine Engineering
Copyright
Disclaimer



Introduction

Journal of Engineering and Manufacturing Technology(JEMT) is an open access academic refereed journal published monthly by BluePen Journals.

JEMT publishes research articles that report premier fundamental discoveries and inventions, and the applications of those discoveries, unconfined by traditional discipline barriers. All articles published by JEMT are published in English.

The objective of JEMT is to publish the most significant as well as innovative articles in the area of research in engineering as well as manufacturing technology; in other to accelerate the sharing and free-access of knowledge.

The scope of the journal is broad and it includes but not limited to the following areas of specialty:

a. Material Science

Advanced Glasses and Ceramics, Advanced Prosthetic Materials, Application of Ionic Liquid, Biomedical Materials Processing, Chemical Synthesis of Functional Materials, Dielectric and Ferroelectric Materials, Electrode Materials for Lithium Ion Battery, Electrode Position and Electroless Plating, Magnetoelectric Composites, Micro/nano Capsulation, Microstructure Characterization of Solid State Materials, Microwave Materials and Measurement, Nanofibre and Nanohollow Fibre Processing, Nano-materials and their application in devices, Photo-electronic Thin Films, Semiconductor Materials, Surface Wettability, Synthesis, Modification and Applications of Nanomaterials, Thermoelectric materials, etc.

b. Civil Engineering

Bionics, Concrete Fracture Mechanics, Finite Element Methods, Foundation Treatment, Geoenvironmental Engineering, Geotechnical Engineering, Ocean Engineering Structure, Pile foundation, Project Risk Analysis and Safety Evaluation, Soil Dynamics, Soil Improvement, Stability Theories, Steel Structures, etc.

c. Chemical Engineering

Applied Thermodynamics, Biomass Utilization, Bioseparation Science and Technology, Biotransformation on Steroids, Biotransformation, Catalytic Reaction, Chemical Process Intensification, Chemicals Production from Coal, Colloidal and Interface Science, Computer Simulation and Bioprocess Design, Fine Chemicals and Their Synthetic Technology, Heterogeneous Polymerization Technology, Heterogeneous Reactions and Catalysis, In Vivo and In Vitro Biocatalysis, Integration and Intensification, Membrane Bioreactor for Wastewater Treatment, Membrane Distillation with Solar Energy, Optimum Design of Reactors, Polymer Nanocomposites, Polymerization Engineering, Process Modeling, Protein Folding, Reactor Design and CFD Simulation, Supercritical Fluid Technology Based Micronization, Superhydrophobic Film, Synthetic and Bionic Membranes, Tissue Engineering, etc.

d. Mechanical Engineering

Alloy Design and Synthesis of Bulk Metallic Glasses, Automatic Control, Computer Aided Manufacturing, Construction Machinery Design, Cryogenics Systems, Diagnostics of Machinery Product, Fault Tolerant Control, Hybrid Control, Kinematics and Dynamic Analysis of Robot, Machine Vision, Mechanical Design, Mechanics, Micro/Nano Manipulation, Microscale Thermal and Flow Analysis, Multibody (rigid or flexible) Dynamic Analysis, Neural Fuzzy Control, Optical Design, Optical Metrology, Optimal Mechanical Design, Parallel Robot and Mobile Manipulators, Plasticity, Precision Manufacturing, Process Integration and Energy Conservation, Quality Control, Reverse Engineering, Robotic Mechanism and Control System Design, Swarm Intelligence, Vibration and Modal Analysis, Vibration and Noise Analysis, etc.

e. Electrical and Electronic Engineering

Band, Biomedical, Communication Systems, Computational Electromagnetic Fields, Controls Automation and Smart Machine, Data Encryption, Digital, DSP, Electric Power System Security and Contingency Planning, Electrical Machines and Drives, Electromagnetic Wave Propagation and Dielectrics, Electronic Warfare, Energy Scavenging, Fiber Optics Communication, Fiber Optic Devices, Fiber Laser, Optical Networking, Free-Space Optics, Optoelectronics, Image Processing, Inverse Optimal Control, MEMS, Analog IC Design, Device Physics, IC Fabrication and Packaging, Microelectronics, Microwave Active and Passive Circuits, Millimeter Wave and Ultrawide, Mobile and Cellular, Multivariable Control, Networking, Nonlinear Dynamics, Non-linear Dynamics, Pattern and Face Recognition Systems and Microprocessor-Based Systems, Radar, RF Circuit Design, Satellite, Sensor Network, Signal Processing and Communications, Signaling, Solar Photo Voltaic, VLSI, FPGA, Artificial Intelligence, Wireless, etc.

f. Mining Engineering

Geomechanics, Resource-saving mining technologies, Stability of mine workings, Wave processes in rock mass, Mineral dressing, Mining machine science and ventilation systems. Also includes papers on the mechanical properties, pressure distribution, brittleness, drillability, and blast behavior of rock in mines, Geothermal Energy, Hydro-electric Stations, Metro Systems, Open-pit Mines, Petroleum Engineering, Quarries, Underground Mines, Tunnels, Shafts, Site Investigation, etc.

g. Marine Engineering

Ship design and economics, Ship production and repair, Ship hydrodynamics and structure, Ship maneuvering and control, Ship resistance and power, Propellers, Rudders, Hydrofoil and shafting, Ship hull vibration, Ship building materials, Marine engines and fuels, Intact and damaged stability, Offshore and ocean engineering, Safety and environmental applications, Welding technology, Heat transfer and fluid flow, Solid and fracture mechanics, Design optimization, Experimental methods and applications, Numerical modeling and simulation, Mining science, Naval architecture, Marine structural mechanics, Shipbuilding technologies, Marine structural mechanics, Marine machinery, Marine electrical equipment, Marine communication apparatus, Undersea teleoperator/Underwater robot, Ocean engineering, Coastal engineering, Marine drilling, Offshore drilling, Offshore engineering, Underwater technology/Undersea technology/Subsea technology, Underwater welding, Marine navigation equipment and systems, Underwater acoustic engineering/Hydroacoustic engineering, Ship management and economics, etc.

All articles that are submitted to this journal are made to undergo sectioning to ensure that they are in line with the scope of JEMT and as well as the instructions for authors. Thereafter they are double-blindedly peer-reviewed by both internal and external reviewers. More than 100 reviewers are working diligently to shorten the review cycle of the academic research publication; and help researchers to pay more attention on the research itself, not waiting for too long, for suggestions from reviewers.

To be accepted, a paper must be judged to be truly outstanding in its field and to be of interest to a wide audience. The primary criteria during the review and selection process of the submitted papers are; sound theoretical basis, valid empirical application and analysis, and contribution to the fields of medicine. The primary criteria in the final selection of the papers once the review process is complete are quality, originality, and relevance to the international medical fields.

The electronic version of published article is available at www.bluepenjournals.org/jemt. The articles on this website are available in abstracts and full-text; and are accessible, free of charge to our web visitors.

Copyright

Copyright is a major issue for JEMT. Manuscript submission and their accessibility is not an infringement of copyright. All articles in JEMT remain the property of their authors.

Disclaimer

The contents of published articles represent solely the ideas of authors. Editors as well as Board of Editors of JEMT are not responsible for the views expressed by authors. However, the Editorial Board of JEMT takes responsibility for making publication decisions for submitted manuscripts based on the reviewer’s evaluation of the manuscript, policies of the journal Editorial Board and legal restrain acting against plagiarism, libel and copyright infringement.

Abbreviation: J. Eng. Manuf. Technol.
Language: English
ISSN: 2053-3535
Start Year: 2013


OTHER JOURNALS

International Journal of Research in Environmental Studies

International Journal of Modern and Alternative Medicine Research

Journal of Medicinal Plant and Herbal Therapy Research

International Journal of Modern Biological Research

International Journal of Advance Agricultural Research

International Journal of Food Research

International Journal of Applied Microbiology and Biotechnology Research

International Journal of Business and Finance Management Research

International Journal of Research and Reviews in Education






© 2017 - BluePen Journals | Terms | Privacy policy | Advert | Help |