Editors

Prof. Er. Ajit Pal Singh
Production Engineering Department,
College of Engineering,
Defence University,
Ethiopia.

Prof. Lizhong Ning
201 Institute of Hydrodynamics,
Faculty of Water Resources and Hydropower Engineering,
Xi�an University of Technology,
No.5 South Jinhua Road,
Xi'an, 710048
China.

Prof. Marcelo Seido Nagano
University of São Paulo
School of Engineering
Production Engineering Department
São Carlos, Brazil.

Prof. Raj Senani
Division of Electronics and Communication Engineering,
Netaji Subhas Institute of Technology
New Delhi, India.

Prof. Horia Andrei
Valahia University of Targoviste
Faculty of Electrical Engineering
Dambovita, Romania.

Prof. M. Marsaline Beno
Ibra College of Technology
Ibra, Oman.

Prof. Hussein Darwish Mustafa
Glass Research Department
National Research Centre
Cairo, Egypt.

Prof. Jignesh G. Bhatt
Instrumentation & Control Engineering Department
Faculty of Technology
Dharmsinh Desai University
Nadiad, India.

Prof. Adrian Traian PLESCA
Department of Power Engineering,
Faculty of Electrical Engineering,
Gheorghe Asachi Technical University of Iasi,
Romania.

Editorial Board Members

Dr. Engin Cetin
Electrical and Electronics Engineering Department,
Pamukkale University,
20070 Denizli,
Turkey.

Dr. Chao Wang
Schlumberger,
14910 Airline Road,
Rosharon,
TX, USA 77459.

Dr. Jamiu Kolawole Odusote
Materials and Metallurgical Engineering,
University of Ilorin,
Kwara State,
Nigeria.

Dr. Tao Xing
University of Idaho,
875 Perimeter Drive MS 0902,
Moscow, Idaho 83844-0902,
USA.

Dr. Osueke Godson Ogubuike
Mechanical Engineering Department,
Federal University of Technology,
Owerri,
Imo State, Nigeria.

Dr. Babak Ebrahimian
Department of Infrastructure & Offshore Geotechnics,
Petroleum Industry Research Engineering Company (PIRE Co.)-
2nd Floor, No. 3, Aftab Alley,
Shafagh Avenue, Dadman Boulevard,
Shahrak-e-Ghods (Gharb),
Tehran, IRAN.

Dr. M. Venkata Ramana
School of Material Science and Engg,
Harbin Institute of Technology,
Shenzhen Graduate School,
Shenzhen,
P R China.

Dr. Mohamed Arezki Mellal
Solid Mechanics and Systems Laboratory,
Faculty of Engineering Sciences (FSI),
M�Hamed Bougara University,
Boumerd�s,
BP71 Bordj M�naiel,
Wilaya de Boumerd�s,
Algeria.